第一精工は大阪市東成区にある「これがないと釣りができないわけではないがあればスマートな釣具」のメーカーです。

  • [1] First, loosen the star drag, then use a 13mm wrench (sold separately) to remove ① the lock nut by turning it counterclockwise, and ② remove the drag nut, etc.
    [2] Remove the tension roller,
    ・When replacing the urethane rubber, remove the bottom end plate ③ by turning it clockwise.
    - When replacing the carbon washer, remove it with tweezers, etc.
    *If you turn the tension roller upside down, the carbon washers etc. will come off all at once and become black and dirty, so please work with the tension roller upside down.
    [3] Replace the necessary parts and assemble in reverse order. (① Do not tighten the lock nut too hard, but only lightly tighten it with a tool.)

    Please refer to the diagram for the arrangement of parts.

    Please also refer to the video.
    https://youtu.be/MnkP4vtkcVs?si=1g2D0PFedpk7t1m8&t=149