A reel seat for winding that supports the preparation firmly for big fishing, fixing the reel during high-load line winding to reduce the burden.

GATCH REELSHEET　　¥14,000(JPY)

SPEC

● Size (when stored): 340×105×110 mm
● Weight: 1105 g
● Effective clamp mounting width: 15 to 83 mm
● MADE IN JAPAN (Parts: MADE IN CHINA)

Feature 1

Firmly secured to tables, etc., with a dual-leg clamp.
Securely fits tables, etc., without damaging them using non-slip washer covers.
For cases where it is acceptable for worktables to get scratched, you can further secure the seat with spikes after removing the covers!

Equipped with a quick bolt function for quick attachment and detachment.

Feature 2

Sturdy with 2-mm-thick pipes and front-end aluminum solid caps.

Feature 3

Stored compactly. At the time of use, the pipe is tightened with two screws to prevent rattling!

Feature 4

Adopts a reel seat manufactured by FUJI KOGYO Co., Ltd.

Feature 5

The reel seat has a double-nut design to prevent reel loosening to ensure solid handling.

Feature 6

Designed to avoid contact with tables, etc., even with 120-mm-class long handles on jigging reels.

Usage 1

Loosen the two knob screws until they pop out with spring force.
Pull the knob screws and open the cover.

Usage 2

Spread the reel seat, close the cover, and tighten the screws while pushing in the knob screws.

Usage 3

Secure the reel seat firmly to the table, etc., with clamps.
At that time, tighten the clamp screws evenly on both sides.

Usage 4

Secure the reel you are using with two nuts.

*When loosening the thumbscrew after use, hold the cover while loosening the thumbscrew. If you don't hold it in place, the thumbscrews may get caught.

*When using a large spinning reel, it is recommended to place this product as far away as possible from the tensioner, etc., for greater stability.

Recommended sets

Recommended stronger and quicker settings
[High-Speed, KACHI KACHI, GATCH] Recommended Set Example

High-Speed Recycler 2.0 + KACHI KACHI Tensioner + GATCH REELSHEET

Cautions

● When attached to a table or similar surface, rubber marks may be left
Also, tables, etc., may get scratch damage if attached without the non-slip washer covers. Be cautious.
● Tighten the clamp screws evenly on both sides.
● Depending on the reel, the reel seat or the foot of the reel may get scratch damage. Consider using commercially available reel foot covers as needed.
●Depending on the size and shape of the reel, such as a small low-pro double-shaft reel, it may not be possible to install it.

3D view

Drag the mouse sideways on the image to rotate the image.

Drag the mouse sideways on the image to rotate the image.

Video Clip

Product No	Product name	Price (excluding tax)	quantity	To shopping cart	parts
33337	GATCH REELSHEET	¥14,000(JPY)		Out of stock	parts

Server too busy. Please try again later.